Seitz ML33 Lip Mike Lite

Add to cart
  • Description

ML 33 Mike Lite with 2 Bright Green LED's and 1 White LED.

Bright NVIS Green A and Unfiltered White.

 

2ea. Bright NVIS Green A LEDs, 1ea. White LED

We recommend using the minimum light necessary. For some of us that requires more light than for others. This light produces the same NVIS Green A light as the ML-32, but is brighter. Change from White to NVIS Green A by a switch on the battery pack. The NVIS Green A LEDs are compatible with all night vision goggles and devices, and preserve dark adaptation. The White LED is not compatible with night vision goggles or devices, The White LED allows you to see colors. A generation III product. The ML-33 has a Push ON - Push OFF switch that can be actuated by the lip or tongue. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. The toggle switch on the battery snap is for alternating between the NVIS Green A LEDs and the unfiltered White LED. Uses 2 ea. AA batteries (not included).

 

THIS IS A 3.0 VOLT LIGHT. USE 2ea. AA BATTERIES. DO NOT USE A 9.0 VOLT BATTERY.

Includes: 1ea. ML-33, 1ea. header card with mounting instructions, 1ea. 1"x1.75" adhesive backed loop velcro, 1ea. BGAA/1 Battery Holder Bag , 1ea. ML-2-7 (2ea AA battery holder, Plastic), 2ea. wire ties,  1ea. 5/8"x1/8" adhesive backed hook & loop velcro, 1ea. thumb screw, 2ea. insulating shields.

NOTE: We recommend using the ML-Dim with this Mike Lite. The ML-Dim provides a way to adjust the brightness as necessary.